• High Speed – up to 40 straps per minute
• Stainless Steel Frame with nylon, locking castors
• Standard Arch Size 850mm x 500mm for cross strapping
• Ready to operate in less than 25 seconds
• Energy Saving Auto Shut off
Features and Benefits
Stainless Steel Construction
Specially designed for the food industry: stainless steel cabinet, arch, covers and bottom cover splash sheet. Machine can be easily moved using white nylon locking castors.
Strap cycle is initiated when pack presses ball switch, enabling faster, two handed operation.
If operated without a pack in place, the strap forms a small loop which is ejected from the sealing unit leaving the machine ready for the next cycle.
A wide range of tension can be selected via a single dial. Tension capability up to 80kg.
Reliable Motor & Drive Mechanism
Self-lubricating design and minimum amount of moving parts increases motor life and reduces maintenance requirement.
Fully automated version, with conveyor belts built into table top (RQ-8 STSA 415v 3ph); Twin-arch, double-strapping machine (RQ-8 STSD); Lower working height (650mm) to integrate with existing conveyor line (RQ-8 STS LB).
Arch Size W 850 mm x H 500 mm
Width 1452 mm
Depth 609 mm
Height 1503 mm
Weight 175 kg
Table Height 794 mm
Minimum Package Size W 80 x H 30 mm
Maximum Package Size W 725 x H 725 mm
Joint/Strap/Coil heat seal/polypropylene/ ID 200 x OD 450 x W 200 mm
Strap Width 5, 6, 9, 12, 15.5 mm
Strap Tension up to 784N (80kgf), 150mm stroke
Speed 1.5 sec./strap, 40 straps per min.
Power Supply 100 – 240V Single phase 50/60Hz 0.65KV
Dimensions and specifications are subject to change without notice