Packaging Supplies and Strapping Machines
01827 310330

Automatic Strapping Machines

We have been providing all types of Automatic Strapping Machines for many years, nd have a wealth of experience in this area. We are pleased to supply and stock the Akebono machines, suitable for a wide range of requirements.

The RAN-505 has proved one of the most reliable machines available to the consumer today. It is based upon the Akebono 510 which has been in service for over 10 years. Akebono are one of the world’s leading manufacturers, with great success in the European newspaper industry in particular. This new range is set to follow with equal success.

Being fully automatic it accepts strapping from from 5mm to 12mm, and has  high-value features such as automatic feed into the Machine, and missed strap ejection as standard. Most machines are being sold set to narrower strap widths, such as 5 mm or 9 mm giving the user longer coil lengths, and less down time changing coils. At the same time it illustrates the high quality of this machine to consistently run such narrow straps. The standard arch size is 600mm wide by 500mm high; however other arch sizes are available and can be tailored to your particular requirements. Warranty is 6 months on site.

Please click below for PDF.

Akebeno RAN505 PDF

Akebono RAN-505 Automatic Strapping Machine

The RQ-8 is a high speed, reliable automatic polypropylene machine suitable for a range of uses.

  • Excellent speed – 1.5 seconds per cycle
  • 5mm to 15mm polypropylene strap accepted
  • Self-correcting technology in the unlikely event of a short feed
  • Easy strap loading
  • Simple controls
  • Strap size options
  • Robust construction


For further information on RQ8 please click below for PDF.

StraPack RQ8 PDFRQ-8 Auto Strapper

The RQ8X is available in Multiple arch sizes and can operate on 5mm to 15mm polypropylene strap, Therefore this machine can be tailored to meet your specific specifications.

  • High Speed – up to 55 straps/minute
  • Robust, portable design with locking castors
  • Easy strap loading
  • Ready to operate in less than 25 seconds

For further information on RQ8 please click below for PDF.

RQ8X Automatic Strapping Machine

The Strapack AQ-7M offers the following:

  • Easy Strap Loading
  • Up to 30 strap cycles/minute
  • Robust, stainless steel construction
  • Ready to operate in just 25 seconds

Features and Benefits

  • Stainless Steel Construction
  • Fully enclosed control cabinet and reinforced lower cabinet protect against moisture.
  • Side Seal Design: off, oil and debris.
  • Permanently Lubricated Mechanisms
  • Self-lubricating design reduces wear & tear and increases operational life.
  • Portable & Versatile
  • Locking castors and Adjustable table height to 3 positions (624mm, 642mm, 664mm).
  • Easy Tension Control
  • Tension is adjusted via a convenient dial. Tension arm maintains consistent tension.
  • Reliable Motor & Drive Mechanism
  • Designed with a minimum of moving parts to increase motor life and reduce maintenance requirement.

Arch Size  W 700 x H 650 mm
Width  1580 mm
Depth  610 mm
Height 1782 mm
Weight  200 kg
Table Height  624, 642, 664 mm
Minimum Package Size W 30 x H 80 mm
Maximum Package Size  W 680 x H 500 mm
Joint/Strap/Coil heat seal/polypropylene/ ID 200 x OD 450 x W 200 mm
Strap Width 5, 6, 9, 12, 15.5 mm
Max. Strap Tension  Max. 120 kg 62 mm stroke
Strapping rate  2.0 seconds
Power Supply  200, 220, 240, 380, 400, 415 V 3 Phase 50 / 60 Hz 0.85 KVA

Dimensions and specifications are subject to change without notice.

Strapack AQ-7M LR Automatic Strapping Machine

• High Speed – up to 40 straps per minute
• Stainless Steel Frame with nylon, locking castors
• Standard Arch Size 850mm x 500mm for cross strapping
• Ready to operate in less than 25 seconds
• Energy Saving Auto Shut off

Features and Benefits
Stainless Steel Construction
Specially designed for the food industry: stainless steel cabinet, arch, covers and bottom cover splash sheet. Machine can be easily moved using white nylon locking castors.

Ball Switch
Strap cycle is initiated when pack presses ball switch, enabling faster, two handed operation.

Self-Correcting Technology
If operated without a pack in place, the strap forms a small loop which is ejected from the sealing unit leaving the machine ready for the next cycle.

Variable Tension
A wide range of tension can be selected via a single dial. Tension capability up to 80kg.

Reliable Motor & Drive Mechanism
Self-lubricating design and minimum amount of moving parts increases motor life and reduces maintenance requirement.

Machine Options
Fully automated version, with conveyor belts built into table top (RQ-8 STSA 415v 3ph); Twin-arch, double-strapping machine (RQ-8 STSD); Lower working height (650mm) to integrate with existing conveyor line (RQ-8 STS LB).

Arch Size  W 850 mm x H 500 mm
Width  1452 mm
Depth   609 mm
Height 1503 mm
Weight  175 kg
Table Height  794 mm
Minimum Package Size W 80 x H 30 mm
Maximum Package Size  W 725 x H 725 mm
Joint/Strap/Coil heat seal/polypropylene/ ID 200 x OD 450 x W 200 mm
Strap Width 5, 6, 9, 12, 15.5 mm
Strap Tension  up to 784N (80kgf), 150mm stroke
Speed  1.5 sec./strap, 40 straps per min.
Power Supply  100 – 240V Single phase 50/60Hz 0.65KV
Dimensions and specifications are subject to change without notice

Strapack RQ-8SUS Automatic Strapping Machine

Used Strapping Machines

We also offer a range of used second hand strapping machines. Type of stock varies, so please give us a call if you have something specific in mind.

Contact Details

Acre Packaging Supplies Ltd
Unit 17, Kepler
Lichfield Road Industrial Estate
B79 7XE

01827 310330>/p>

About Us

Acre Packaging supply a range of new and used strapping machines across the UK. We also supply all types of packaging materials and equipment.